BELKIN N1 WIRELESS EXPRESSCARD DRIVER

Spend money on more lights and triggers and what do I do? Make single light photos. (0.o) Actually tried this the other way around, two strobes cross-lighting the third but wasn't really getting it. light was too hard, spilling all over the place, not spilling enough. So i decided to try it this way: 1 550ex 1/4 power zoomed to 85mm behind and to camera left. 1 silver reflector in front of and to camera right. the background is our bedroom wall, lit by the reflector (double duty, fill and background lighting). The df383's are dialed down to 1/16 (min for these) zoom set to 24mm, with the dispersion plate covering, and the grid spots added to drop another stop or 2. The hot shoe adapters i bought with the CyberSync have both pc and 3.5mm female plugs, which let me daisy chain at least one other strobe. nice trick for using more then one flash in close proximity to each other. (^o^)/

Here is the black wire, soldered to the center tab. I found the best way to solder them was tin the wires, then thread them through the small hole in the tab, fold it back on itself, and solder at the hole.

<< Arhiva >>